If you have a wooden floor and are keen to ensure it is watertight, there are two major questions to ask. The first is whether you actually mean water”proof” or if you mean more resistant to water, and the next is how can you do it? There is a significant gap between”waterproof” and water resistant. Most hardwood flooring which have a finish will have some type of water resistance constructed in. The likes of a lacquered or varnished floor nevertheless, will typically be more water resistant than an oil finished flooring . All that said, if you’re trying to create your wood flooring water”evidence”, you are likely to have your job cut out for you.
When there are numerous products you can buy on the market which will protect your flooring from water, whether or not they will fulfill your anticipation of waterproofing is dependent on what you envision the end result to be. If you have to understand that a few wet footsteps walking out of the shower into the stack of towels won’t result in damage, that is 1 thing, but if you’re thinking of waterproofing a wood floor in a room that you’re turning into a wet room, that is something else altogether.
Ensuring your floor will stand up to wet toes coming in from the outdoors or moist toes making their way across the toilet is reasonably straightforward and requires little over:
Preparing your flooring. To prepare your flooring to get a waterproofing product program, you will need to clear the room, wash the floor thoroughly and fix any damage.
Sanding your flooring. It is crucial that you spend time at the sanding procedure to get a good end result. When you sand, then you should begin with the borders and a rough grit sand paper and move down to a finer grit. Once you’ve completed the sanding procedure you need to wash and vacuum the ground once again.
Applying your preferred waterproofing product. All waterproofing products come with full manufacturer’s instructions and it’s crucial to follow these instructions. On the other hand, the broad guideline is to use at least three coats of waterproofing paints or polyurethane, allowing each coat to dry completely before moving on to another. In between coats, you want to check for any bubbling or wrinkling and sand those off before applying another coat. When you start the process, it’s a fantastic idea to utilize a natural cloth mop to find a good policy and work up to a brush in the end, to find a nice even finish.
TOP TIPS:
– This job is best done on a warm, dry day so the flooring has a good prospect of drying quickly and evenly.
– If applying the finish, work towards the door so that you don’t get stuck in the center of the room and end up having to walk throughout your work.
WORD OF WARNING:
No matter how thoroughly you employ a waterproofing product for your flooring, and no matter what the item manufacturer claims, you should try to mop up spills and avoid flooding at all costs, because these could damage your flooring.
Floor Reviving Lambeth 